We would advise a professional installer however a competent DIY’er can certainly tackle some installs, we are happy to assist where we can and our online guides are available.

The number of composite decking boards required will vary depending on which style you choose, there is a variation in width from 143-150mm, as a general rule though 2 boards per m2 will keep you right. Our online calculator can also work out board requirements and there is also the optional wastage calculator for both 3.6m & 5m decking boards.

Wood plastic composite commonly known as WPC decking is made up of recycled wood and plastic that would have otherwise ended up in landfill.

Grass Yard premium composite decking is an engineered product offering significantly improved durability over wooden decking and as it requires virtually no maintenance, the difference is night and day.

Simply composite decking is a more expensive product to manufacture.

Composite decking is an incredibly durable product that with minimal upkeep will last for years all Grass Yard composite decking come with a minimum 10 year limited warranty, 25 year limited warranty on premier boards.

Grass Yard 3D embossed composited decking boards are made from a single moulded piece of WPC, our capped composite decking boards are made form the same WPC material which has a polymer shell applied to the exterior. This further improves the durability and performance of the composite decking board.

While both our classic range and premium range offer impressive durability, easy installation and minimal maintenance requirements, the premium range provides additional weather protection, increased stain, mould and algae resistance along with added UV protection to reduce colour fade.

A corner trim covers the end of the standard decking boards to conceal the cavities, it has a slight lip and sits over the face of the decking, installed by pre-drilling and screwing through with our colour matched screws or an appropriate outdoor adhesive could be used.

The bullnose is installed flush with the standard composite decking boards, no need for screwing through or adhesive, this would be the more popular option.

Our decking boards come in standard 3.6m & 5m lengths, 143–150mm wide and 25mm deep.

Simple answer no not easily, they can be marked if miss treated we do recommend moving garden furniture etc with some care.

Every decking job should be well support especially composite decking due to the extra weight, as standard 300mm centres should be used, if using timber good quality treated timbers should be used along with frame tape to prevent water ingress otherwise composite or metal frame can be used. The composite decking frame should allow for drainage and good airflow.

Grass Yard composite decking boards come with hidden fixings this system ensures a strong, secure and aesthetically flawless finish. Simple and quick the first board is generally secured down with a hidden stainless steel starter clip then the black plastic T-Fixings are used for an even spacing for the remainder of the deck, the torx screws are stainless steel coated black to ensure they cant be seen within the spacing. The hidden fixings system does not require any specialist tools and the pack will contain a torx driver for the decking screws.

The Grass Yard supply colour matched edge trims and bullnose boards in both the 3d embossed decking & capped co-extrusion decking ranges.

How long have you got, no mud, no mess, no mowing, no stress, no pesticides, no herbicides, no watering when dry, no puddles when wet, no, weeds, no moss, no aeration, no scarifying, no more lawn care! Yes to using the grass all year round, yes the kids can play out without worrying there heading house bound,yes you can sell the lawn mower, yes you can forget the constant lawn care, yes you can save on water, yes you can relax on the weekend with an effortless garden from The Grass Yard!

This one is purely down to personal preference it is possible to install Grass Yard composite decking boards either woodgrain or lined side up.

You don’t! One of the biggest benefits of composite decking boards is the almost complete lack of ongoing maintenance, no painting or oiling is required.

Cleaning composite decking is very easy, a soft broom, mop or even a pressure washer can be used, no harsh chemicals are needed some warm soapy water will suffice for most scenarios, in the unusual case you have a more stubborn stain a light de-greaser could be used, always do a test patch on an area that’s not seen.

All types of decking get slippery when wet, however composite decking will do so far less than timber decking because algae cannot penetrate the grain, preventing a terrible green and slippery surface. Additionally, the embossing on both types of our boards will provide significantly more traction than wood decking.

As with all exterior hard landscaping It makes sense to remove any organic matter, such as leaves and twigs, not just in autumn but year round. It's really just the simple things, spill a drink, wipe up straight away, having a bbq likewise clear up any food that may have been dropped straight away.

Yes there is no specialist tools required for cutting Grass Yard composite decking, similar to wood, the best finish requires a good, sharp blade that is suitable for the composite material.

Be sure to wear appropriate PPE, such as gloves and a dust mask, when cutting composite decking boards.

Yes, you can screw through composite boards in the rare event that the hidden fixing system isn't able to be employed. 

Yard Works stainless steel screws that match in colour work best, and pre-drilling holes and counter-sinking are advised for a neater flush finish.

Indeed, composite decking is a wonderful base for hot tubs. Just like with anything else, though, make sure the structure is built to support the added weight. Water won't soak into the boards like it would with timber, and it won't rot either. All in all, composite decking is a great option for areas surrounding pools and hot tubs.

Composite decking can indeed be pressure washed, similar to other outdoor surfaces. Utilizing the appropriate pressure level, power washing is an effective method for cleaning composite decking. It is crucial to maintain a distance of at least 10 inches between the nozzle and the surface of the boards during the cleaning process.

No unlike timber decking, composite decking boards will not absorb the water and rot out.

It is crucial to exercise caution when utilizing open flames or BBQs in close proximity to your composite decking, as the heat can potentially cause damage to the material. Composite decking boards are composed of a blend of recycled plastic and recycled wood, rendering them more fire-resistant compared to conventional timber decking. However, it is important to note that they can still be susceptible to burning.

Not at all a hinged panel can be fitted in the composite decking to cover the drain and allow access as and when needed.

A good quality white rock salt can be used to melt ice and snow on composite decking. Care should be taken to rinse off when the weather makes this practical always use a plastic shovel, never ever metal, if attempting to break up a build up of ice on the decking, a metal shovel may chip the decking surface.

The durability and wide range of colors make composite decking a popular surface option for roof terraces. However, it is crucial to consult a structural engineer beforehand to ensure that the roof structure can support the added weight.

As with all outdoor landscaping products if we are lucky enough to get some summer weather, composite decking can get hot in direct sunlight. Only in the most extreme conditions within the UK though will the deck be too hot to walk on barefoot. 

Yes composite decking is just as strong as timber decking, as long as the frame has been built to the correct specifications there should be no issues with strength.